Piney Point Vessel Familiarization Practice Test

These questions are part of the practice quiz. Start practicing

• When an officer of the watch gives you an order on the helm, what three actions should you perform?
• What is Breadth?
• What is the vertical partition that separates the interior of a ship into compartments or rooms?
• How many types of anchor windlasses are there and what are they?
• During docking, what is a primary practice to maintain look-out and situational awareness?
• What is the primary purpose of a personal flotation device (PFD), and when is it required on board?
• How would a bulkhead run if it ran from one side of the vessel to the other?
• What are a vessels walls called?
• Why have container ships become one of the leading modes of shipping goods throughout the world?
• During a basic engine compartment fire safety assessment, which practice directly contributes to safe emergency egress?
• What is the purpose of a kill switch lanyard and how should it be used?
• During a sudden weather change while underway, what is a recommended initial action?
• Name all of the reasons when wearing a work vest on ship is required.
• After meeting with your department head first, they will introduce you to who?
• What should all ships worldwide have posted to identify safety equipment, emergency equipment, and escape routes regardless of language?
• Which channel is used for general calling in some regions on VHF?
• After deploying an anchor, how can you verify that it is holding?
• What combination of fire extinguisher types and uses is commonly found on small vessels?
• Which knot is better than an overhand because it is bigger and will not jam?
• Which term is another name for the width of a ship measured from port to starboard?
• Which action is essential during a basic shelter-in-place drill?
• During docking, which practice helps maintain look-out and situational awareness?
• Which statement about the becket bend is true?
• What is an athwartship horizontal structure member used to support a deck?
• What is the purpose of a muster point on a vessel?
• What is the nautical term for being above the deck during maintenance on the mast?
• What is the first action to take when you detect a fuel leak or strong fuel odor on board?
• Which actions constitute a proper post-operation review to identify lessons learned?
• Who conducts inspections to verify vessel compliance with international shipping regulations?
• Why is it important to maintain three points of contact when boarding from a dock?
• Why is the use of ships to transport goods around the globe still the primary means of transporting goods?
• Which of the following is a synthetic line?
• How many types of framing are there?
• Which item is included in a basic vessel safety kit?
• ________ Is the very middle point of a vessel.
• Which task is part of a wiper's main duties aboard a vessel?
• Which component runs athwartship and supports a deck?
• What specialized agency of the United Nations is responsible for measures meant to improve the safety and security of international shipping and oversee shipping regulations throughout the world?
• Which statement about the becket bend is true?
• During a muster drill, which objective besides headcount is typically emphasized?
• What is the series of vertical plating welded perpendicular (90 degrees) to the center girder (keelson) called?
• What term describes the outer shell of a ship that provides buoyancy and keeps water out?
• What are essential pre-departure checks you should perform on engine, steering, and safety systems?
• What is the difference between a bow line, stern line, and spring line in mooring?
• Describe the characteristics of the abandon ship alarm.
• Which action helps mitigate a fuel leak hazard after stopping fueling?
• If you hear abnormal engine noises or feel unusual vibration, what is the correct first action?
• In the unlicensed apprentice program, how many phases does the Engine pathway have?
• It's your time off and you decide to go outside the house to have a smoke or get some fresh air before going to bed. Is it okay to wear open toed shoes while outside?
• In mooring, which line controls the stern position?
• Before departure, which aspect should you verify about the vessel's electrical system?
• How should you respond to a spill of oil or fuel in the water near a vessel?
• Which chart-reading skills are essential for safe local navigation?
• What is the term for the right side of a vessel?
• Which safety device should be tested during pre-departure checks besides fuel and oil?
• Which knot would you use to tie a line to a railing?
• What type of vessel is designed to carry loose cargo, or non-packed dry goods, such as iron ore, grains, phosphates, and bauxite?
• Why is it important to know the overall length of the vessel you work aboard?
• Which of the following is one of the required documents you should have when reporting to the ship?
• Why is it important to avoid ignition sources when you detect a fuel odor?
• Which term describes the vertical partition that divides the interior into compartments?
• Who shall conduct sufficient drills and give sufficient training and instruction to ensure the crew is familiar with their emergency duties and responses?
• What is one PPE item you definitely need in order to climb up the mast to change a mast light?
• What is a knot?
• Which of the following is part of basic environmental precautions before closing up the vessel and leaving shore?
• Which fittings are used to secure lines on deck and on the dock?
• What should be covered about personal flotation devices during the safety briefing?
• Which location is explicitly listed as a possible place to find the Station Bill?
• During a basic safety briefing, which item is designated as muster points?
• A hole or slot in a frame or plate for the purpose of preventing water from collecting is known as what?
• Which knot is commonly used to tie off to a cleat?
• What is a primary reason to maintain proper ballast and weight distribution?
• What is the recommended approach when there is a language barrier on board?
• After signing the contractual agreement and receiving your number or rating title, what should be the first item you need to look for?
• Name the six documents you should have with you when reporting to the ship and meeting with the master?
• The port and starboard sides meet at the bow at a location known as what?
• Which color is the stern light?
• What is the initial action you should take if an injury occurs on board during a trip?
• Which statement correctly defines port and starboard and orientation when facing the bow?
• Which of the following practices are recommended to prevent pollution during Piney Point operations?
• What is the safe procedure to start and stop a typical outboard engine?
• What are the functions of the bilge pump and bilge alarm on a small vessel?
• What are potential effects of improper loading on a vessel's stability?
• If visibility becomes poor while underway, what steps should you take?
• Which term describes the vertical distance from the waterline to the bottom of the hull?
• Who is tasked with inspecting vessels, both foreign and domestic to a particular maritime nation, verifying that the condition of the ship and its equipment comply with the regulations of the IMO?
• List all PPE you should be wearing while using a needle gun to chip loose paint off a rusted spot of a bulkhead?
• What is the proper sequence for a basic onboard safety briefing for passengers?
• What is the left side of a vessel called?
• Which knot is commonly used to tie a line to a post?
• Your vessel is at ANCHOR when you go to report onboard. What piece of equipment would be available to allow you to come on board?
• What is the very front end of the ship called?
• What measurements can a multimeter be used for?
• What action should you take immediately if you suspect a fuel spill during fueling?
• What is the purpose of basic load distribution and how can improper loading affect stability?
• Which color is associated with the starboard side navigation light?
• Which steps constitute a safe refueling procedure to minimize spills and vapors?
• Which of the following is a synthetic line?
• What is the bight?
• Which abandon ship alarm pattern is correct?
• What is the watertight body of a vessel that floats on the water called?
• Which officer is typically introduced after meeting the department head and is responsible for the ship's command?
• Which measure helps keep the vessel within safe speed in a crowded harbor?
• Which item should be documented after a near-miss incident to support safety records?
• That contractual agreement will indicate the type of route the ship runs. Which of the following pairs are the two route types?
• You open a hatch in order to access the space below and need to leave it open. What should you do?
• In the unlicensed apprentice program, how many phases does the Steward pathway have?
• When reporting onboard at anchor, which equipment would be used to come aboard?
• When given a helm order, which practice should you follow to ensure the instruction is carried out?
• How should the kill switch lanyard be secured during operation?
• Which fire extinguisher type is most appropriate for electrical or equipment fires on a small vessel?
• Which device removes contaminants and water from fuel oil and lubricating oil?
• What is the first action in a basic MOB (man overboard) response?
• In the unlicensed apprentice program, how many phases does the Steward pathway have?
• Which of the following best describes the primary purpose of a windlass?
• Name a natural fiber line.
• What is the mandatory credential that all credentialed merchant mariner workers are required to have in order to gain unescorted access to secure areas of ports, vessels, and outer continental shelf facilities?
• Which of the following is a valid location for the Station Bill?
• A hammer fell from aloft and hit your hard hat. The hard hat did its job and protected your head. You examine the hard hat and see no visible damage. What should you do now?
• Identify the times you would be required to wear hearing protection.
• Which statement about anchor windlasses is true?
• How should you communicate a change in plans to the crew and dock staff?
• The electric grinder you grab out of the tool locker has a tiny spot where there is a wear and tear showing an exposed wire. What should you do?
• Which steps verify that safety equipment is in date and operable before a trip?
• Who is the junior-most Deck Officer?
• Which sequence describes the proper response to a helm order?
• Which item provides proof of identity and qualifications among the six documents?
• Who is responsible for the safety onboard the ship?
• What are key steps in an emergency plan?
• How many weeks is Phase 1?
• Bulk carriers are designed to carry what kind of cargo?
• Which knot is used to join two lines of equal size?
• Which statement correctly defines a knot?
• Which of the following is the strongest type of line?
• What contractual agreement will you sign when meeting with the ship's Master?
• What is the correct procedure for reporting a near-miss incident on Piney Point operations?
• Which type of line is the strongest?
• Which pair of colors correctly represents the starboard and port lights together?
• LOTO stands for what?
• When responding to a spill, who should be notified?
• A wiper primarily supports which crew members in the engine department?
• Which statement accurately reflects the requirement for markings identifying safety equipment?
• If a bulkhead runs from the port side to the starboard side of a vessel, what term describes this orientation?
• What are the basic distress signals for land and water?
• What information are you looking for on this first item?
• Which three parts should never be painted on a watertight door?
• What is the required gap in days between QMED classes before taking another set?
• How should oily absorbents and hazardous waste be disposed of legally and safely?
• Where can the first item you need to look for be found?
• What are the primary VHF channels used for distress, hailing, and inter-ship communications?
• According to the U.S. Department of Defense, what percentage of total U.S. freight travels on the western rivers of the U.S.?
• Which actions should you take when approaching a dock in busy or restricted waters?
• Which option best explains why sea transport remains essential for many goods?
• Which rating is responsible for running and maintaining pumps used in liquid cargo transfer and related deck machinery?
• During refueling, why should you stop just short of overflow and ventilate the area?
• What program ensures there is a pool of civilian owned merchant ships on retainer and available to transport military hardware and weapons to a theater of war when needed?
• Which mechanisms does a purifier use to separate contaminants and water from oil?
• What is the term for ANY equipment that is on the seaward side of the vessel?
• Which of the following are common signs of hazards in shallow water for a vessel?
• Which synthetic line will float?
• Which term describes the vertical series welded at 90 degrees to a center girder to form interior divisions?
• In the event of a near-miss, what is the recommended approach to improve safety?
• Which item should be included in a Mayday call on VHF Channel 16 to signal for help?
• Which knot forms a secure loop that won't slip around an object?
• What allows personnel to move from one compartment to another on a ship?
• If you are asked to identify the color of the port light, you would answer?
• What is the purpose of a float plan and what information should it contain?
• Which PPE items are required for needle gun task?
• Which officer serves as the Navigation Officer?
• What does the Merchant Marine Act (the Jones Act) require when it comes to shipping in the U.S.?
• What color is the stern light?
• How should you test and operate the vessel's steering and throttle controls before departure?
• Which action helps prevent slips, trips, and falls on deck?
• After stopping due to abnormal engine noises or vibration, what should you do before resuming operation?
• How many boilers do ships have?
• What is the purpose of a deck log or vessel operations log?
• What is the primary purpose of the emergency diesel generator on a ship?
• Explain the importance of conducting drills.
• If a tool shows wear on its cord and there is exposed wire, what should you do?
• Who is the officer in charge of the Engine Department?
• Which position is in charge of engine room operations?
• What is the purpose of spring lines in mooring?
• What colors are the starboard and port navigation lights?
• Which item in a basic safety kit is used for signaling in an emergency?
• What is the primary function of a purifier on a ship?
• The stern light color is used to indicate the vessel's rear orientation; what color is it?
• Which color is displayed by the port navigation light?
• In which scenarios is wearing a work vest on a ship specifically required?
• Explain the IALA buoyage system in simple terms and what red and green marks indicate.
• What are padeyes used for?
• Which knot forms a temporary loop in the end that will not slip?
• What are the vertically positioned voids placed between cargo holds known as?
• Which of the following is a natural fiber line?
• In the unlicensed apprentice program, how many phases does the Deck pathway have?
• Who should you notify after muster and accountability in an emergency plan?
• Which color is displayed by the starboard navigation light?
• What is the proper sequence to deploy and recover an anchor on a small boat?
• Which group is considered Operational Officers?
• What type of cargo do tanker ships carry?
• You have been tasked with climbing the mast in order to replace a mast light 15 feet above the deck. What is the term to describe that you are above the deck?
• Why is it important for the navigator to know the draft of the vessel they work aboard?
• Which of the following are the four valve categories?
• A post-operation debrief should include which element?
• What is the role of a dedicated spotter during close-quarters maneuvers?
• If you are asked to identify the color of the starboard light, you would answer?
• How should you verify the navigation lights are functioning at night?